Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: philnohair on 31 October 2010, 08:45:50
-
Just joined the forum and went to my first meet at Oxford yesterday and been PM'd by a couple of OOFers to let me know my high level brake light is not working (only noticed as I was leaving of course - doh!).
I've had a quick look but through fear of breaking something I can't even work out how to access it. Any help gratefully received, thanks.
Phil.
-
Trim holding the light just unclips. Got one here if your`s is U/S
-
Its integral to the upper plastic trim at back of headlining.
If its getting power when brakelights are on, just change the trim piece. I have one here (deepest Brackley) you have have if you need one (I'm assuming mine works ;D)
-
Thanks to you both RobG and The Boy. I've got it out - I was just afraid of breaking something but thanks to Rob's reassurance I pulled a bit harder! I'll be in touch if it's not working, thanks.
-
Thanks to youm both RobG and The Boy. I've got it out - I was just afraid of breaking something but thanks to Rob's reassurance I pulled a bit harder! I'll be in touch if it's not working, thanks.
:y
-
When mine went it was a bit of dry/cracked solder near the plug,just put a new blob of solder and ok :y
-
When mine went it was a bit of dry/cracked solder near the plug,just put a new blob of solder and ok :y
Thanks for your tip too mahony. Unfortunately it's raining and I have no cover so all work has stopped for now! On the upside I have removed my offside sill covers to carry out the boot fix I found on the forum and my wife has cleaned them all for me and I found a 2p piece under there! Happy days. ;D
-
Many thanks to you all for your help and offers of a replacement. I managed to work out how to pull it all apart and just as mahony suggested, the solder connection to one of the wires was cracked. A new blob of solder and hey presto, it's working fine now.