Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: shaggyaberarth0 on 25 October 2010, 15:42:23

Title: only half the heating working in my car
Post by: shaggyaberarth0 on 25 October 2010, 15:42:23
not long bought an omega 2.2 estate.
however we have found out that although we have heating in the rear vents it is just putting out cold air in the front.
we dont have an owners book does anyone have an idea what is wrong.
its getting really cold outside and you can feel the chill factor in the car.
please help
Title: Re: only half the heating working in my car
Post by: Kneepad on 25 October 2010, 20:12:51

Don't know about the 2.2 but you could try pressing the auto and off buttons at the same time to reset it.
Someone with a bit more know how will be here shortly.
Title: Re: only half the heating working in my car
Post by: PhilRich on 25 October 2010, 21:57:08
Quote
not long bought an omega 2.2 estate.
however we have found out that although we have heating in the rear vents it is just putting out cold air in the front.
we dont have an owners book does anyone have an idea what is wrong.
its getting really cold outside and you can feel the chill factor in the car.
please help


Look here for a copy of the 2.2 Owners manual :y
I have also sent you a PM (Personal Message)



http://images.omegaowners.com/documents/UserGuides/OmegaOct2002.pdf
Title: Re: only half the heating working in my car
Post by: Filth_Mobile_Jim on 16 November 2010, 16:21:58
Quote
Don't know about the 2.2 but you could try pressing the auto and off buttons at the same time to reset it.
Someone with a bit more know how will be here shortly.

Sorry to hijack the thread, but what does this reset achieve? As my 3.0 will only produce hot air, not cold!! The opposite problem  :D
Title: Re: only half the heating working in my car
Post by: Boditza on 16 November 2010, 17:21:15
Quote
Quote
Don't know about the 2.2 but you could try pressing the auto and off buttons at the same time to reset it.
Someone with a bit more know how will be here shortly.

Sorry to hijack the thread, but what does this reset achieve? As my 3.0 will only produce hot air, not cold!! The opposite problem  :D

it will reset the servo motors and make them close completely and after that they will learn the course. from what i know your problem might be the HBV (heater bypass valve)