Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: acura on 19 November 2010, 18:05:01
-
Hi Guy, long time no speak.
Is the facelift front wing bolt on or is there welding required?
Slight altication with another car so probs easiest to replace wing :-[
Thanks
Steve
-
bolt on, remove front bumper to remove lower ones at front, and pop the sill cover off at wing end to access the very bottom one, theres another one acessed from inside the arch liner (door side) and the ones along the top.
:)
-
Manythanks vauxfan2k :y I wonder if someone has a star silver OSF wing for sale? ::)
-
Further question guys,
The paint code for my (son's) meega is Z157, its an 02 plate. I've seen a wing on ebay which is for a facelift but is advertised with a Z147 paint code.
My question is: did the facelift have the Z147 code as well as the Z157 or could the seller on ebay have made a mistake and the code for the wing is really Z157? :-/
Thanks for your help.
-
2 different codes, 2 different shades, best stick with your own code type, as its pretty noticable if you mix them.
:y
-
Cheers :y
-
2 different codes, 2 different shades, best stick with your own code type, as its pretty noticable if you mix them.
:y
Mine is `53 plate Z157 and I`ve replaced a door and rear bumper with Z147 and there`s absolutely no difference
-
2 different codes, 2 different shades, best stick with your own code type, as its pretty noticable if you mix them.
:y
Mine is `53 plate Z157 and I`ve replaced a door and rear bumper with Z147 and there`s absolutely no difference
But you're colourblind Rob ;) :P ;D ;D ;D :y