Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: skyblue on 29 November 2010, 13:22:06
-
The drivers door button looks like its sticking when I use the fob to lock /unlock it....hence why im useing the key now to lock/unlock it. All the other door buttons popup/down without any problem at all . Before I start taking off door cards etc is there easier way to resovle this problem???
-
Mine did the same and I nearly resigned myself to having to change the solenoid but I sprayed some WD40 carefully down the sides of the button and it magically started working again! Been working for over six months now. Worth a try but taking the door card off isn't that hard a job. See maintenance guide.
-
Thanks for that mate.... will give it a go as its too bloody cold to be out there for hours on end mucking about with cars ;) :)
-
I had to do the MV6's solenoid the other day. Its ssoooo nice now to not have to fumble with the key :y
-
I had to do the MV6's solenoid the other day. Its ssoooo nice now to not have to fumble with the key :y
Want a replacement microswitch for it?
Kevin
EDIT: Or did we have this conversation? Mullered during removal? ::)
-
I had to do the MV6's solenoid the other day. Its ssoooo nice now to not have to fumble with the key :y
:y thanks for that, looks like I will be getting cold very soon then ;) Could you give us a rough idea of the cost of it please
-
I had to do the MV6's solenoid the other day. Its ssoooo nice now to not have to fumble with the key :y
Want a replacement microswitch for it?
Kevin
EDIT: Or did we have this conversation? Mullered during removal? ::)
Ah, yes, I will put it in the pile for you... ...microswitch tests good with a meter (both of them)...