Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: freecall666 on 14 December 2010, 20:25:37

Title: looking for part
Post by: freecall666 on 14 December 2010, 20:25:37

looking for conrod for 2.0L there is 2.2L on the bay will that fit the same as 2.0L? thanks

Title: Re: looking for part
Post by: geoffr70 on 14 December 2010, 20:34:37

I think the 2.2 is a 2.0 litre with a longer stroke, so I wouldn't have thought so, but not entirely sure.

Looking at some of your posts before, are you sure it's the little end? Make sure you're as sure as you can be before starting any potentially unnecessary work.

Title: Re: looking for part
Post by: freecall666 on 14 December 2010, 20:54:18

Quote

I think the 2.2 is a 2.0 litre with a longer stroke, so I wouldn't have thought so, but not entirely sure.

Looking at some of your posts before, are you sure it's the little end? Make sure you're as sure as you can be before starting any potentially unnecessary work.

garage conirmed, had camara in engine, its twisted at top end, piston is fine but little end has gone :'(

Title: Re: looking for part
Post by: freecall666 on 14 December 2010, 20:55:28

and conrod, so need both or conrod and end bearing thing :'(