Omega Owners Forum
		Omega Help Area => Omega General Help => Topic started by: megaomega123 on 15 December 2010, 16:18:58
		
			
			- 
				Can someone describe the symptoms of the crankshaft sensor failing. 
The main point I need clarifying is, does the engine turn over or is there a big fat nothing?
			 
			
			- 
				The engine will turn over but it won't receive the signal to fire the plugs so won't start.
			
 
			
			- 
				Ok thanks. So that being the case, leads to my next question. 
I left work and the car stalled and would not start for 10 minutes. No turning over, no clicking, nothing. All electrics were good. Not done it since. Any ideas?
			 
			
			- 
				thats not a crank sensor symptom, sounds like a bad earth, check all the engine bay earths, and the battery connections are tight, also check connections at back of starter.
could also be a solenoid problem on the starter