Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: pigtown on 13 December 2010, 19:31:03

Title: LPG Switch?
Post by: pigtown on 13 December 2010, 19:31:03

LPG switch has started to go haywire!
The power LED goes out as if there is no power yet there is when measured with a meter. It is intermittent and works sometimes. I tried to power it up on the bench and the LED does not come on with 12v applied. Does anyone know if another input is required to power up?

Title: Re: LPG Switch?
Post by: TheBoy on 13 December 2010, 19:37:40

2.2 was never offered with Duel Fuel, so guessing aftermarket LPG...

If you state LPG kit, somebody may know...

Title: Re: LPG Switch?
Post by: pigtown on 13 December 2010, 19:53:37

It's a mixer system the name on the switch is Milano.
It has a 3 way switch and a row of LEDs to show gas level.

Title: Re: LPG Switch?
Post by: Lazydocker on 14 December 2010, 08:16:16

Quote

It's a mixer system the name on the switch is Milano.
It has a 3 way switch and a row of LEDs to show gas level.

:o :o :o :o

Afraid I've never heard of that make but I'd advise checking all connections, including power connections for the kit too ;)

Title: Re: LPG Switch?
Post by: pigtown on 14 December 2010, 19:00:03

Power is there even when the switch is going off. But with a bench power supply I cannot get the LEDs on so I'm thinking there must be another input required to allow it  to work. Unless it is the switch unit itself that is dead.  I have seen a diagram and there is a connection to the coil to get the revs input so I'll have to check that connection.

Title: Re: LPG Switch?
Post by: mark.adams on 17 December 2010, 21:46:44

Sounds like the LPG system i have, mine is a BRC.
Need any info from mine?

Title: Re: LPG Switch?
Post by: PhilRich on 17 December 2010, 21:50:43

Possible dry solder joint on the switch circuitboard? :-/