Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: bellers on 27 January 2011, 22:00:03

Title: Mv6 gearbox
Post by: bellers on 27 January 2011, 22:00:03
Hi folks
Ive got my first problem with my omega :) havent pulled it apart yet to see which it is either propshaft or gearbox making a knocking and no drive :(

Im just looking to see incase ive to buy gearbox are all v6 boxes the same or will my mv6 box have a diferent ration?

Thanks
Jonny
Title: Re: Mv6 gearbox
Post by: henryd on 27 January 2011, 22:21:46
it could be the diff or driveshafts rather than the box,get someone to try it while you have a look underneath and see whats spinning and whats not
Title: Re: Mv6 gearbox
Post by: Elite Pete on 27 January 2011, 22:27:50
Auto or Manual?
Title: Re: Mv6 gearbox
Post by: bellers on 27 January 2011, 23:09:13
forgot to say its manual

when i rev car the knock gets quicker and when im in below i can hear knock from where gearbox meets the prop
Title: Re: Mv6 gearbox
Post by: henryd on 27 January 2011, 23:14:15
Quote
forgot to say its manual

when i rev car the knock gets quicker and when im in below i can hear knock from where gearbox meets the prop

ok but does the prop spin when car is in gear with clutch released
Title: Re: Mv6 gearbox
Post by: bellers on 27 January 2011, 23:40:14
Ill check tomorrow and let yas know. If its spinning will that hint towards diff. Even tho the knocking is from gearbox end?
Title: Re: Mv6 gearbox
Post by: bellers on 29 January 2011, 18:57:04
Started the omega today as i had to move it to make some room the prop shaft is turning and when i let the clutch out and lots of juttering from backend and a wee bit of drive
Title: Re: Mv6 gearbox
Post by: Audi_Paul on 29 January 2011, 23:07:20
Diff!
Title: Re: Mv6 gearbox
Post by: chuftsmv6 on 30 January 2011, 23:25:22
hi i had the same problem i changed the diff first and it ended up being the gearbox as well i was gutted they both died the same time :'( :)