Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Aundie on 04 February 2011, 19:29:25

Title: cam kit
Post by: Aundie on 04 February 2011, 19:29:25

just put car in for cam kit with kit i supplied from partco.
got phone call from garage tensioner unit too big! took it back to shop to find the only other one they had the same, after looking through part catalogues found a 3rd part no. for my car kit not in stock, coming in tommorrow just hoping it's going to be different from other 2!
any knolageable people some reassuring words would be great!
Hoping it's not had an engine change before i got it!

Title: Re: cam kit
Post by: Marks DTM Calib on 04 February 2011, 19:59:13

The only thing that changes is the backing plate for the tensioner and upper idler.

In reality, you can reuse this bit........... :y

Title: Re: cam kit
Post by: TheBoy on 05 February 2011, 10:23:10

Quote

The only thing that changes is the backing plate for the tensioner and upper idler.

In reality, you can reuse this bit........... :y

To clarify, you can reuse backing plate, but need to use new tensioner/idler :y