Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: MutantCav on 16 February 2011, 16:08:47

Title: How Do You Remove Quick Release???
Post by: MutantCav on 16 February 2011, 16:08:47

Can someone please tell me how you remove the pipes running through the bulkhead to the heater matrix?? Specifically the quick release valve thingies...

Thanks :)

Title: Re: How Do You Remove Quick Release???
Post by: neilr on 16 February 2011, 16:32:40

push or pull clip until it clicks then persude the hose off

Title: Re: How Do You Remove Quick Release???
Post by: mark.adams on 16 February 2011, 19:10:23

Pull the furthest end of the pipe towards you so it clicks, theres 2 clips you have to depress to make this happen, then twist back and forth to remove pipe from bulkhead, worth putting a little grease or vaseline on the ends of the metal pipes after removal to aid refitting... Pig of a job to get them off first time but once you've done it, it gets easier.

Title: Re: How Do You Remove Quick Release???
Post by: MutantCav on 16 February 2011, 21:37:30

Thanks lads...didnt want to break anything...will practice on the breaker first though lol

Title: Re: How Do You Remove Quick Release???
Post by: Jimbob on 17 February 2011, 08:19:55

maint guides are your friend ;)

http://www.omegaowners.com/forum/YaBB.pl?num=1185891036

Title: Re: How Do You Remove Quick Release???
Post by: MutantCav on 17 February 2011, 08:27:54

Thanks Jimbob :y I didnt think there would be a maint guide for something so supposedly simple...but then I have stripped many Omega and had to ask so it makes sense...good ol' OOF :y