Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Raymienets on 16 February 2011, 20:56:34

Title: Fitting headlamp washers
Post by: Raymienets on 16 February 2011, 20:56:34

Retro fitting to facelift. Got the washers frim Elite Pete. Heard there was power connection for pump beside radiatior. What else do I need. Do I need another water tank or do I take a feed from main Washer bottle.

Title: Re: Fitting headlamp washers
Post by: RobG on 16 February 2011, 21:00:56

Second pump for the headlights (may be a blanking bung in existing tank). Front of triangular fusebox by battery facility for fuse near the relay....fit 30A and obviously all the pipework

Title: Re: Fitting headlamp washers
Post by: harpersimon on 17 February 2011, 12:04:19

can you get the little squirter nozzles themselves, seperate? coulple of mine have broken off and the water goes straight up :-)

Title: Re: Fitting headlamp washers
Post by: Carfix on 17 February 2011, 14:29:25

When I retro-fitted the headlamp wash system to my pre-facelift miggie I had to change the water tank.

The original tank was about half the size of the one needed for headlamp wash. It also had the two take offs for winscreen and headlamp pumps.

Title: Re: Fitting headlamp washers
Post by: Raymienets on 17 February 2011, 14:31:51

Quote

can you get the little squirter nozzles themselves, seperate? coulple of mine have broken off and the water goes straight up :-)

Yes you can buy them although not cheap. Look in the for sale section. Or Flea Bay.