Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Omega Man on 16 February 2011, 21:29:22
-
Its driving me mad :o Ive stripped out the headlining and snipped off the speaker, none of that beeping now ;D Is there anything else I need to do except terminating the wires?
-
you could have disconnected it from the control unit behind the spare wheel
-
Yes, remove the ECU from the car and send it to me to compare results with a dodgy one I have here!
-
And I'll take the wiring loom and detectors off you to try and sort mine !!
BTW .. the speaker unplugs just above the control box ... I know .. mine is .. :) no need to go into the headlining or snip anything !!
-
And I'll take the wiring loom and detectors off you to try and sort mine !!
BTW .. the speaker unplugs just above the control box ... I know .. mine is .. :) no need to go into the headlining or snip anything !!
Indeed, snip wires? Bloody hooligan! ;)
-
And I'll take the wiring loom and detectors off you to try and sort mine !!
BTW .. the speaker unplugs just above the control box ... I know .. mine is .. :) no need to go into the headlining or snip anything !!
Indeed, snip wires? Bloody hooligan! ;)
In fact I would have had the speaker.... With intact wire/plug. ::)
-
Where is the beeper / speaker? mine is to quiet, I have to turn off the radio and climate to hear it...... ::)
-
Where is the beeper / speaker? mine is to quiet, I have to turn off the radio and climate to hear it...... ::)
Runs up the as side c pilar into the roof liming, one was right next to the sunroof, tother car had it further back by the rear window. Might be worth moving it further forward, and checking the two connectors by the pas side light cluster are not connected in loud mode, connected they ate in quiet mode, I think that's the correct way round anyway.
Reply 46
http://www.omegaowners.com/forum/YaBB.pl?num=1279621948/45
-
Thanks, I feel a bit of a plonka with the snip snip thing, but it was driving me mad >:( Ill disconnect at the box, should have posted the question here before reaching for a tool :y ;D