Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: unlucky mark mv6 on 19 February 2011, 22:21:48

Title: po141 code
Post by: unlucky mark mv6 on 19 February 2011, 22:21:48

As i have code po141,it says sensor 2 on bank 1 heater circuit malfunction,am i right in saying that the lamba is knackered,or is it something else,possibly vacuum leak,faulty injector etc,or even blowing manifold. :-/

Title: Re: po141 code
Post by: Entwood on 19 February 2011, 22:24:43

Quote

As i have code po141,it says sensor 2 on bank 1 heater circuit malfunction,am i right in saying that the lamba is knackered,or is it something else,possibly vacuum leak,faulty injector etc,or even blowing manifold. :-/

It is sensing an open circuit in the heater line ... all lambda probes are heated.

Either ... heater has failed = new lambda sensor or a wire is off/damaged

Title: Re: po141 code
Post by: unlucky mark mv6 on 19 February 2011, 22:26:49

Thanks entwood,will check it out tomoz then. :y

Title: Re: po141 code
Post by: unlucky mark mv6 on 19 February 2011, 22:32:15

Also where is this sensor located,would it be the bottom one on the drivers side. :y

Title: Re: po141 code
Post by: RobG on 19 February 2011, 22:33:10

Quote

Also where is this sensor located,would it be the bottom one on the drivers side. :y

:y

Title: Re: po141 code
Post by: unlucky mark mv6 on 19 February 2011, 23:21:51

Thanks rob :y