Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: mick-1975 on 26 February 2011, 16:28:11

Title: fault reading
Post by: mick-1975 on 26 February 2011, 16:28:11
hi all i have a 2.2 sport estate omega and i have plugged in my tester and it comes up with a gear ratio incorrect .
 is there anyone to plug in a decent tech 2 to see if this problem can be resolved .many thks mick :y
  all ready replaced gear box as old one was no good just hope this can be resolved easily  :y
Title: Re: fault reading
Post by: Andy B on 26 February 2011, 16:29:45
Quote
hi all i have a 2.2 sport estate omega and i have plugged in my tester and it comes up with a gear ratio incorrect .
 is there anyone to plug in a decent tech 2 to see if this problem can be resolved .many thks mick :y
  all ready replaced gear box as old one was no good just hope this can be resolved easily  :y

you appear to be in the right part of the world for a Tech II & someone that can read it.   ;)
Title: Re: fault reading
Post by: Jimbob on 26 February 2011, 16:44:35
what other faults were logged?

specifically, cam sensor?  that is well known for flagging up dodgy errors.

anyway, clear out the codes, and see what reappears before worrying too much, may just be your ATF wants topping up.
Title: Re: fault reading
Post by: mick-1975 on 26 February 2011, 16:51:39
Quote
what other faults were logged?

specifically, cam sensor?  that is well known for flagging up dodgy errors.

anyway, clear out the codes, and see what reappears before worrying too much, may just be your ATF wants topping up.



  thanks ,i shall reset codes and re post tomorrow to show codes .  :y