Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Sir Tigger KC on 05 March 2011, 10:28:35
-
Hi All,
Are there different scuttles depending on the age of the car or is it a case of one scuttle fits all? :-/
Many Thanks :y
-
later ones have a home for facelift washer jets (which are bonnet mounted by default on prefacelift)
-
later ones have a home for facelift washer jets (which are bonnet mounted by default on prefacelift)
they also have a great big sponge on the underside to direct water onto the ignition system ;D
(I don't remember my pre-facelift having that 'feature' ::))
-
Many Thanks, and yes I know that sponge 'feature' so well!! :( :(
-
.... (which are bonnet mounted by default on prefacelift)
mine aren't ;) ;) ;) The original scuttle already had blanked off holes in it. :y :y
-
later ones have a home for facelift washer jets (which are bonnet mounted by default on prefacelift)
they also have a great big sponge on the underside to direct water onto the ignition system ;D
(I don't remember my pre-facelift having that 'feature' ::))
I thought this was a special Elite feature to keep the coil pack clean and sparkly :o :o
-
The brilliant sponge feature :) I have (hopefully) sealed the joint up with silicone and a couple strips of denso tape underneath on my one, before I did it I wanted to see how bad the leak was and poured some water down the windscreen expecting a slow drip but it just streamed straight through straight onto the coil pack, I am changing the passenger side coil pack tomorrow and fitting new plugs all round so touch wood its all sealed.