Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: JamesV6CDX on 09 March 2011, 22:22:24
-
The other day I took off the plenum/inlet and changed the Stat.
I also removed the coil packs to look in the plug wells.
I put it all back together - started fine, but upon driving a bit, seemed to lack power.
I had a look under the bonnet, and the rear multiram vaccum was de-tatched.
My bad - reconnect this.
I took the plenum off again when I did the cambelt, and made certain everything was seated right, and no air leaks.
At the moment, she feels more like a 2.5 than a 3.2. Not running rough, just nowhere near the "3.2 poke" it had when I collected her.
When I started her from cold today, she misfired for a few seconds, then ran smoothly (but still underpowered).
Any thoughts?
The only code logged is the cat efficiency one.. which is normal for a 3.2...