Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: affa1234 on 06 March 2011, 19:42:16
-
hi,i have a v6 2.5 on a x plate and have just fitted a cruise control stalk and box and cable under the bonnet.does any 1 know how to activate it.or do i need other parts...regardes,
-
Did you check that your brake switch is a 4-pin one (and if manual will need clutch switch also)
-
mine is auto,does the switch need to have 4 pins
-
mine is auto,does the switch need to have 4 pins
Look at the brakeswitch, it needs to look like this if it`s a 4-pin
(http://i190.photobucket.com/albums/z257/belisensis/brakeswitch.jpg)
-
mine is auto,does the switch need to have 4 pins
yes.
-
thanks will check 2moro..
-
hi, checked the switch and it is 4 wire,anymore ideas as to what to do.
-
hi, checked the switch and it is 4 wire,anymore ideas as to what to do.
Was the switch itself 4 pin? You need to unplug it to check it.
-
yes itis 4 pin,does iy need to be activated.
-
yes itis 4 pin,does iy need to be activated.
No.
How many wires did the stalk have on its fly-lead?
-
not sure,will check it 2moro.thank.
-
not sure,will check it 2moro.thank.
*cough*
From Forum Rules:
Use English, no text speak which is notoriously difficult to read.
*cough*
(there are reasons)
Back on topic, ensure its the 4 wire stalk, and flying lead plugged in.
Also, check bowden cable is free to move, and properly attached to throttle
-
got it working,thanks to all members for the info...ps,it was the brake light switch