Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Field Marshal Dr. Opti on 24 March 2011, 16:20:26
-
I've just washed the car for the first time this year. I noticed that the water runs down the screen and then into the engine bay via the wiper spindle. It then drips all over my newly fitted 135 coil pack.....soaking everything.... :-/ :-/
Is this a common fault?.......What is the best way to make the engine bay water-tight? ...The seal around the wiper spindle seems piss poor to me. Would silicone sealant cure the leak?
Thanks in advance..... :y
-
I've just washed the car for the first time this year. I noticed that the water runs down the screen and then into the engine bay via the wiper spindle. It then drips all over my newly fitted 135 coil pack.....soaking everything.... :-/ :-/
Is this a common fault?.......What is the best way to make the engine bay water-tight? ...The seal around the wiper spindle seems piss poor to me. Would silicone sealant cure the leak?
Thanks in advance..... :y
I think it may be Opti, as I have seen two facelifts with coil packs that have evidence of water coming down on top of the engine and then finding its way into the spark plug compartments even though in theory the rubber seals should stop that happening! I take it you have brown / orange water staining around the plug connector rubbers? ;)
-
Is this a common fault?
yes. :'(
The seal around the wiper spindle seems piss poor to me
yes >:(
Would silicone sealant cure the leak?
yes :y (probably...) also a bead along the scuttle join just to be sure.
Remember to check the drains at either end of the scuttle so the water has somewhere else to go.
HTH,
Al. :y
-
I made up some new sponge rubber gaskets to put under the scuttle cover around the wiper spindles