Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: SteveAvfc. on 29 April 2011, 09:15:10

Title: Manifold Problems.
Post by: SteveAvfc. on 29 April 2011, 09:15:10

Hi is any one able to tell me if the manifold on a 2.2 petrol is secured using steel inserts.
I have two that have become loose and therefore tap whilst cold on removing one there was what i thought to be a helicoil attached to the bolt, i have how ever been told that this could be a factory fitted steel insert and will now indeed need a heli coil to make good a repair is this so. Many thanks guys Steve.  :-/

Title: Re: Manifold Problems.
Post by: RobG on 29 April 2011, 09:18:56

Quote

Hi is any one able to tell me if the manifold on a 2.2 petrol is secured using steel inserts.I have two that have become loose and therefore tap whilst cold on removing one there was what i thought to be a helicoil attached to the bolt, i have how ever been told that this could be a factory fitted steel insert and will now indeed need a heli coil to make good a repair is this so. Many thanks guys Steve.  :-/

AFAIK Steve the manifold studs were screwed into tapped threads not inserts

Title: Re: Manifold Problems.
Post by: SteveAvfc. on 29 April 2011, 09:26:37

Ok Rob so is the heli coil my only option then ??

Title: Re: Manifold Problems.
Post by: RobG on 29 April 2011, 09:33:48

If you`ve got no thread in the head, yep