Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: MV6Matt on 22 May 2011, 18:55:14

Title: Airbag light still on
Post by: MV6Matt on 22 May 2011, 18:55:14

Finally got round to replacing the passenger door airbag sensor yesterday.......... ::)

Disconnected the battery, took the door lining  + paraphenalia off, unstuck the membrane (I've found out it's proper name!) from the bottom of the door. Swapped sensor and everything back in true Haynes style.

Start engine and airbag light stays on. What am I missing? Does it now need to be cleared by Tech 2?

TB, thanks for the Heads up about the wiring. Was a little unsure how to check though as the wires are all neatly carried in ribbed plastic tubing behind the strip which is riveted on to the door skin.
Also wasn't really able to see much inside the circular door plug once I'd got it off.

Any ideas any one? :-/

Title: Re: Airbag light still on
Post by: gstylebaby on 22 May 2011, 19:23:59

I think the light will have to be cleared mate.  As for testing the wiring can you not continuity test it mate you know test on ohms/diode bleep. One leed of meter on one end and the other leed on the other end.
Hope this helps. :y

Title: Re: Airbag light still on
Post by: TheBoy on 22 May 2011, 19:31:46

That code needs clearing...  ...fairly certain Lazytinker has the facilities to do this...

Title: Re: Airbag light still on
Post by: MV6Matt on 23 May 2011, 05:40:09

Quote

I think the light will have to be cleared mate.  As for testing the wiring can you not continuity test it mate you know test on ohms/diode bleep. One leed of meter on one end and the other leed on the other end.
Hope this helps. :y

Hopefully, will be fine when cleared, but many thanks for the advice on testing!
Appreciated!

Matthew

Title: Re: Airbag light still on
Post by: MV6Matt on 23 May 2011, 05:40:33

Quote

That code needs clearing...  ...fairly certain Lazytinker has the facilities to do this...

Thanks TB!