Omega Owners Forum
		Omega Help Area => Omega General Help => Topic started by: Jusme on 25 May 2011, 22:21:00
		
			
			- 
				As previously stated had a few problems starting recently. Did the pedal trick today and got :
 
 0300 > Random misfire.
 0305 > Cylinder 5 misfire detected.
 0335 > Crankshaft position sensor "A" circuit malfunction.
 0420 > Catalyst system efficiency below threshold. Bank 1.
 0430 > Catalyst system efficiency below threshold. Bank 2.
 
 Car seems to run normally, and only had problem starting about 3 or 4 times, although yesterday it took about 15 mins of trying to get her started. I guess this is simply going to get worse. So what to do now, and in which order ? And is anything affecting the performance of the other faults..? Help greatly appreciated...  ;)
- 
				Replace crank sensor mate  :y
			
- 
				Replace crank sensor mate  :y What he said ^
- 
				Thanks for advice. Is there only one type of crankshaft sensor for this engine ? It got me scared today as the engine management light was on solid all the way home....
 
- 
				There are 3 and Vx cannot tell you which one you have.  You need to get under the car and look at the part number on it (located by the oil filter)