Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: raywilb on 16 June 2011, 16:04:19

Title: rear door removal
Post by: raywilb on 16 June 2011, 16:04:19

does anybody on the oof know where i can get a "door hinge pin" removal tool. that will do the job. i intend trying  remove & swap  my rear doors on the mig.  never attempted the job before.

Title: Re: rear door removal
Post by: RobG on 16 June 2011, 16:09:52

Flat bladed screwdriver, failing that, a flat bladed screwdriver with a notch cut in the centre of the blade. seemples.
A little tip, disconnect multi-plug behind rubber grommet at base of pillar, undo checkstrap, then close the door before knocking pins out

Title: Re: rear door removal
Post by: MutantCav on 16 June 2011, 16:53:44

Or if (as they often are) they prove stubborn...pair of mole grips and whack them with a hammer (the mole grips, not the pins)...

To access the pins, open the front doors...you can get to them easier than access with the back doors open :y

Title: Re: rear door removal
Post by: raywilb on 16 June 2011, 17:19:53

cheers lads, intend to try tomorrow.  :y :y

Title: Re: rear door removal
Post by: omegod on 16 June 2011, 19:01:58

Or if all else fails break out the grinder

(http://i167.photobucket.com/albums/u134/jdbefc/013.jpg)

Title: Re: rear door removal
Post by: dbug on 16 June 2011, 19:26:29

Quote

Or if all else fails break out the grinder

You selling that mate ?  A bit of Isopon and it'll be good as new  ;D ;D ;D ;D ;D ;)

Title: Re: rear door removal
Post by: omegod on 16 June 2011, 19:58:44

Quote

Quote

Or if all else fails break out the grinder

You selling that mate ?  A bit of Isopon and it'll be good as new  ;D ;D ;D ;D ;D ;)

Gave it to the " any old ironnnnn" man the other day, sorry mate  ;D

Title: Re: rear door removal
Post by: Stallion on 17 June 2011, 01:25:23

Grinder it is then  :y  ;D ;D ;D