Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: mantamania on 24 June 2011, 19:43:37

Title: Loose door trim
Post by: mantamania on 24 June 2011, 19:43:37

I have a 2001 omega of which the top of the door trim near the lock pin is loose.  On inspection the "L" shaped piece of plastic which clips to the top of the door is becoming detached.  I have tried superglue and hot glue gun but they did not work.  As any one who has had this problem managed to stick it back again, if so what glue did you use. 

Thanks

Title: Re: Loose door trim
Post by: Figureman52 on 24 June 2011, 19:47:22

I used araldite and put a couple of small screws in to hold it whilst setting, I gave it 24hrs to set properly. I left the screws in when I put the trim back on.

Title: Re: Loose door trim
Post by: mantamania on 24 June 2011, 19:48:49

Thanks, I'll give that a go

Title: Re: Loose door trim
Post by: joff on 24 June 2011, 20:10:54

Or just get another door card there are a few around at the moment so you could just get the right one for you mig. That's what i did got mine from RobG ;)