Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Auto Addict on 10 July 2011, 12:48:24

Title: Why does Mark make it look so easy?
Post by: Auto Addict on 10 July 2011, 12:48:24

Need to adjust the handbrake to get it through the MOT.

Do you need to remove the heat shields on both sides?

Title: Re: Why does Mark make it look so easy?
Post by: VXL V6 on 10 July 2011, 16:09:02

Yes, you will need to remove them both to get easy access to the adjuster.

Title: Re: Why does Mark make it look so easy?
Post by: TheBoy on 10 July 2011, 20:07:47

I tend to only remove one side - depends how good/bad your rachet 13mm spanner is.

Title: Re: Why does Mark make it look so easy?
Post by: blue_dream on 10 July 2011, 21:46:27

Hi
   No you don't need to take heatsheilds off, just need several extension bars and feed through from the rear propshaft bearing to the front, dead easy and alot quicker  :y

Title: Re: Why does Mark make it look so easy?
Post by: tidla on 10 July 2011, 22:19:25

adust the shoes first??

Title: Re: Why does Mark make it look so easy?
Post by: 2woody on 11 July 2011, 09:19:23

Quote

adust the shoes first??

absolutely. In all my time with Omegas, I've never adjusted the centre adjuster. Shoes always !

Title: Re: Why does Mark make it look so easy?
Post by: TheBoy on 11 July 2011, 10:12:45

We tend to recommend loosening the cable, then doing the adjustments on the shoes, then readjust the cable. This ensures everything is correct :)