Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Alex W on 13 July 2011, 12:07:57

Title: V6 Faults codes 19 & 21
Post by: Alex W on 13 July 2011, 12:07:57

I replaced my crank sensor after getting code 19 as advised in topic below "Misfire Fault 19". While I was at it, I had the plenum off and cleaned the breathers and replaced the HBV I also changed the fuel filter because it was long overdue.

Reassembled and made to go on a test drive  but immediately had "Automatic Transmission" warning car didn't want to move. Stopped and paperclipped. I now have codes 19 & 21.

I am assuming that I have done something stupid, can anyone point me in the right direction?

Thanks in advance.

Title: Re: V6 Faults codes 19 & 21
Post by: RobG on 13 July 2011, 12:14:23

Make sure the TPS is connected firmly on the throttle bodies

Title: Re: V6 Faults codes 19 & 21
Post by: Alex W on 13 July 2011, 12:23:13

I had left the electrical connector to the throttle housing off. Numpty!!!

Auto transmision warinng has cleared now.

Title: Re: V6 Faults codes 19 & 21
Post by: Andy B on 13 July 2011, 14:05:46

Quote

I had left the electrical connector to the throttle housing off. Numpty!!!

Auto transmision warinng has cleared now.

I did that once!  ::) ::) ::)