Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: s7eve v6 24v on 06 August 2011, 08:44:38

Title: stud pattern and et help
Post by: s7eve v6 24v on 06 August 2011, 08:44:38
what is the stud pattern and et on my 2001 omega?
any help would be good as cant find anything on here
about it  :)
Title: Re: stud pattern and et help
Post by: Brikhead on 06 August 2011, 09:27:23
The P.C.D. is 112 and the offset on my wheels is ET39.

Title: Re: stud pattern and et help
Post by: Olympia5776 on 06 August 2011, 09:40:46
Quote
The P.C.D. is 112 and the offset on my wheels is ET39.


No it isn't .
The pcd of the Omega is 5 x 110 . Offset is usually 35 to 39.
Title: Re: stud pattern and et help
Post by: Brikhead on 06 August 2011, 10:29:43
Whoops, I have the memory of a goldfish!
Next time I'll try and do some research rather than using 'brain power'...
Title: Re: stud pattern and et help
Post by: s7eve v6 24v on 06 August 2011, 11:21:21
cheers guys
Title: Re: stud pattern and et help
Post by: sjc on 06 August 2011, 16:57:09
MV6 alloys are ET33 IIRC and Steinmetz 8.5" x 17 wheels are ET25 which will rub slightly at the back with 235/45 tyres on.
Title: Re: stud pattern and et help
Post by: Mr Gav on 06 August 2011, 18:50:40
Quote
MV6 alloys are ET33 IIRC

Correct, and I`m certain that all other Omegas will be ET35 too, the Steinmetz have a smaller offset so they wont rub the struts with them being 8.5"
Title: Re: stud pattern and et help
Post by: RobG on 06 August 2011, 20:29:31
Quote
Quote
MV6 alloys are ET33 IIRC

Correct, and I`m certain that all other Omegas will be ET35 too, the Steinmetz have a smaller offset so they wont rub the struts with them being 8.5"
Nope, wrong. MV6 are ET39