Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: CHRISKG on 17 August 2011, 14:42:03

Title: Various multiram questions.
Post by: CHRISKG on 17 August 2011, 14:42:03

Just learning my way around the v6 engine bay and though i'd check if my multiram system was working.

It isn't.

1st thing I noticed was the vac pipe connection to the actuator on the rear solenoid has snapped off. 

What is the part number for this item?  The solenoid that is.

I hooked up a digi manometer to the pipe from the vac tank to test the vacuum.  It did start to slowly create a vacuum at idle.

Any idea what kind of figure this vac should be or how quickly it should be created?

Cheers

Chris

Title: Re: Various multiram questions.
Post by: RobG on 17 August 2011, 15:17:03

Quote

Just learning my way around the v6 engine bay and though i'd check if my multiram system was working.

It isn't.

1st thing I noticed was the vac pipe connection to the actuator on the rear solenoid has snapped off. 

What is the part number for this item?  The solenoid that is.

I hooked up a digi manometer to the pipe from the vac tank to test the vacuum.  It did start to slowly create a vacuum at idle.

Any idea what kind of figure this vac should be or how quickly it should be created?

Cheers

Chris

Got one here, or you can use the one from the SAI :y

Title: Re: Various multiram questions.
Post by: CHRISKG on 17 August 2011, 17:26:16

Quote

you can use the one from the SAI

Good tip.  I'll give that a go.