Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: amba on 19 August 2011, 13:37:20
-
Guys .
Despite the screen washer bottle being full and not leaking from below,on turning ignition key messsage appears that " Washer Fluid Level" is low.
Any pointers as to where abouts is the sensor and how to get access to it.
-
Bottom of reservoir near centre, push fit
(http://i190.photobucket.com/albums/z257/belisensis/Washersensor.jpg)
-
Thanks RobG.
Poor old "girl" is starting to show her age..bits keep failing...I know how she feels.
-
Same happened to me, a 30 second fix once you get a new part..... :y :y
-
Same happened to me, a 30 second fix once you get a new part..... :y :y
...........got some more here if OP needs ;)
-
Thanks guys for info.
Found it at filler end of bottle...access was simple with foglight and bumper grille removed.
Took the old one out and gave it a clean and refitted and so far problem seems to have been cured...fingers crossed.
-
Hi I've got this prob on my fl looks like washer bottle is. In front of the rad is it just a case of pulling old one out and putting new in and are these still available from dealer
-
Yep... just make sure the washer fluid level is below the level of the sensor when you pull the sensor out. ;)
-
Dealer price might be a bit of a shock :-\ I would advise to get one from RobG.
-
Dealer price might be a bit of a shock :-\ I would advise to get one from RobG.
Got some here :y
-
Ok rob how much and how I get one thanks
-
Ok rob how much and how I get one thanks
PM sent
-
Ok rob how much and how I get one thanks
PM sent
And replied