Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: macey on 15 August 2011, 18:32:51
-
Hi There I have owned my omega 2.2 for 4yrs no trouble but just recently trouble starting it with a cough and a blow but when it gets going it runs as normal and when i stop and start it again 1 hour later its fine just that first operation over night. It's 2.2 petrol and done 98000 miles any suggestions please
-
Is the EML on
-
yes
-
think it is time too read some codes do you have access to obd reader ??? :y
-
sorry no
-
Update your profile with location etc :y
-
RobG im new to this and i cant seem to edit my profile my location is sandhurst berkshire if that helps
-
if you p.m kevin wood he as access to a tech 2 which can read your fault code and in turn tell you whats wrong :y
-
As per other thread, what light "spanner" or "engine" :question
-
Hello
My 2.2 petrol auto Has the same problem .
It will show spanner sometime then next time engine symbol
and it seems to be missing on start up but runs ok after that .
I am in Bolton area if any one know someone to check the codes.
Thanks in advance
John
-
Sorry for jumping in on This thread :'(
But its identical probs as mine .
Must be the weather !!!
-
You really need to get the codes read, I have had a problem recently which, through experience, I would have said was a cam sensor, as it happens I am just about to change my coil pack as have a misfire on cylinder 1............... :(
-
Symptoms Point to the cam sensor, but you need to get the codes read.
As I've said before, if it is the cam sensor - only buy one from a Vx dealer, do NOT buy one from anywhere else, even if it's supposed to be 'genuine'.
-
I had very similar symptoms, changed the cam sensor, and maf sensor, all is well, have to say, only had cam sensor on me fault reader, but picked up a maf sensor for under a tenner, yes under a tenner ;) and put it on, as changing the cam sensor I still had a lumpy tick over on a morning, get it checked though on a reader though, and make sure. OH by the way, noticed oil on the old cam sensor, so changed the cam cover gasket as well just to make sure. Good luck with it. :y