Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Raymienets on 25 August 2011, 14:56:19

Title: wiring problem
Post by: Raymienets on 25 August 2011, 14:56:19

Temp Gauge stopped working. Have located loose wire about 3 inches long coming from ecu temp sender. Have pic showing this wire connects to right of this  to temp dial sender. Problem I have this is the wire has a spade connector and the connection for the temp sender is round. Has a some sort of connection came loose and got lost or what. Any advice would be grateful. Awkward to post any pic as it is at the back of engine.

Title: Re: wiring problem
Post by: Gaffers on 25 August 2011, 15:15:17

Your eyes are not deceiving you, the spade will go on the round connector :y

Title: Re: wiring problem
Post by: Raymienets on 25 August 2011, 15:27:21

Cheers will give it ago
 :y

Title: Re: wiring problem
Post by: Andy B on 25 August 2011, 16:11:28

Quote

Cheers will give it ago
 :y

Goes on like this .....  :y
(http://images.omegaowners.com/images/guides/OilCoolerPipesV6/VaderPictures022.jpg)

Title: Re: wiring problem
Post by: Raymienets on 25 August 2011, 16:35:37

Quote

Cheers will give it ago
 :y

Sorted thanks, been searching about for ages looking for another connection.