Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: P6UL K on 20 September 2011, 04:52:10
-
Morning!
Yesterday afternoon when starting the car she started really rough and lumpy but settled after a few seconds but the service (is that what it is?) has light came on. :-/
Hasn't affected performance or anything, just wondered if the lumpy idle on starting has bought the light on for some reason? Is it going to be a Tech2 job to find out why its come on?
Cheers :y
-
Spanner light is the engine managment light. Engine-shaped is for emissions control faults.
Read the codes, pedal trick is explained in maintenance guides, as well as are all the fault codes. I suspect you have 0300 and some other 030-codes for misfire due lumpy start. Maybe also 0335 for crank sensor, which might be the origin of poor starting.
-
Ok, just been out and done the pedal trick and here's the results...
1 Very brief flash just as all the other lights go out then...
5-2-3
Then nothing, no more flashing - stays off.
Any ideas?
*Edit*
Could this be it?
P1523 Electronic Throttle Control Malfunction
-
reckon so ;)
-
Ah rubbish! :(
So what does that mean, its knackered and needs replacing?
-
Assuming no symptoms, clear it out, see what comes back...
-
Nah nothing, car seems to run just dandy!
Is there a guide on how to clear the codes also? :-[
-
Nah nothing, car seems to run just dandy!
Is there a guide on how to clear the codes also? :-[
Guide for clearing codes...........................code reader ;D ;D :y
-
I figured that might be the answer lol...
No one in Kent tho, a right PITA! :D
-
I figured that might be the answer lol...
No one in Kent tho, a right PITA! :D
Pick `em up cheap enough........................or you could drive to Bristol :D