Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: ANDY8 on 08 July 2007, 20:00:43

Title: vauxhall vivaro
Post by: ANDY8 on 08 July 2007, 20:00:43
Hi guys,

I have a question about a tomtom one and a vauxhall vivaro van,   Can you cut the end of the tomtom charger off and hardwire it into the van or has the charger got a voltage stepper built into the end????


Any help would be great cos i dont want to blow my gps up  :y
Title: Re: vauxhall vivaro
Post by: LFF64 on 13 July 2007, 12:18:10
Hello I have a Medion 350 and the voltage to the unit is only 5v not sure about tom tom do you have a test meter to check the output of the charger  ? or even easier the charger should have a label on it which will tell you the output voltage. I have taken my charger apart and wired it direct to come on when radio is on ie ignition controlled . only thing is if you want to use unit in another car you wont be able to use the charger as it will be hard wired so you will need a spare charger just in case