Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: LFF64 on 01 August 2007, 00:29:10
-
Hello I have a kenwood kdc6024 and I am fitting it in to my car question is is it possible to have the remote display and the steering controls both working I have a Autoleads PC9-706 fitted to the 4pin din plug from the head unit this gives me the remote display but not the steering control :( I also have a PC9-350 fitted as I have traffic master fitted and working any help anyone please.
-
I have answered my own question rather the man in the local ICE shop has I had to buy two adapters :( to get it too work one is a PC9-350 Kenwood to the traffic master and a little box of tricks not sure what the number for that was.Only problem was the price it cost £70 for the two units :o But I will have the Kenwood fitted and the ipod plugs in too that ;) Just got to try and get all the bits back in behind the head unit :( I have just been removeing the ISO connector blocks and reconnecting using soldered joints so that should give me a bit more room I hope :y
-
Sound like you're having fun. :(
Glad you've got it sorted though.
-
Right I am never going to take the head unit out again :) I hope ;D What a pain it is to get back in. Its all in now and working as it should remote display works steering controls work and traffic master working oh and the ipod is connected in too. The best thing is I replaced the airel connector and now I can get a decent reception :y If anyone is suffering with poor reception this might be worth changing the cable seems to have got very stiff so moving the headunit in and out may have snapped the conductor internally ;)