Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: ffcgary1 on 16 August 2007, 19:39:37

Title: CRUISE LOOM
Post by: ffcgary1 on 16 August 2007, 19:39:37

I am tring to install the brake switch[4 pin] to my 97 v6.and have only got 2 wires going to the switch.is there another plug that i have to find to connect to the new 4 pin switch :o

Title: Re: CRUISE LOOM
Post by: TheBoy on 16 August 2007, 19:51:31

Try it with the existing brake switch - some seem to have weird wiring and only need 2 pin switch  :-/

Title: Re: CRUISE LOOM
Post by: ffcgary1 on 16 August 2007, 20:50:49

That would confir what i thought mate as the elite that i took the clutch switch from also had a two pin switch. ::)

Title: Re: CRUISE LOOM
Post by: TheBoy on 16 August 2007, 20:59:31

Quote

That would confir what i thought mate as the elite that i took the clutch switch from also had a two pin switch. ::)

Yeah, tried to get to bottom of this before, whether the autos had a single 4 pin brake switch, and the manuals have a 2 pin clutch and 2 pin brake.  Alas, the response were inconclusive...