Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Elite Pete on 16 October 2007, 10:24:09

Title: Reversing Sensors
Post by: Elite Pete on 16 October 2007, 10:24:09

The reversing sensors on my 2002 3.2 Elite dont work, can anyone tell me if/where the fuse is. The car used to be a chauffeur car and I was wondering if they have been disconnected, the reversing lights work OK.

TIA :y

Title: Re: Reversing Sensors
Post by: Marks DTM Calib on 16 October 2007, 10:30:40

Check the controller is plugged in, its mounted on the inside of the main metal support between the spare wheel and shock turret in the boot.

Title: Re: Reversing Sensors
Post by: Elite Pete on 16 October 2007, 10:37:50

Cheers Mark :y

Title: Re: Reversing Sensors
Post by: Elite Pete on 16 October 2007, 14:13:33

Quote

Check the controller is plugged in, its mounted on the inside of the main metal support between the spare wheel and shock turret in the boot.

Ive just had a look and it is plugged in :(  

Title: Re: Reversing Sensors
Post by: Elite Pete on 17 October 2007, 08:38:11

Would anyone have the wiring diagram for the parking sensors?

Title: Re: Reversing Sensors
Post by: VXL V6 on 17 October 2007, 09:10:17

You should get a single beep as soon as it goes into reverse. Could be a power or 'beeper' speaker problem I guess.

Title: Re: Reversing Sensors
Post by: Elite Pete on 17 October 2007, 11:48:38

I get nothing at all :'( not a murmer

Title: Re: Reversing Sensors
Post by: Elite Pete on 18 October 2007, 15:59:15

Is there a fuse in the reversing sensor system?

Title: Re: Reversing Sensors
Post by: TheBoy on 18 October 2007, 22:17:05

Quote

Is there a fuse in the reversing sensor system?

Not directly. Fed from reverse lights.

Title: Re: Reversing Sensors
Post by: Elite Pete on 29 October 2007, 10:03:58

Ive been trying to find the sounder/buzzer, does anyone know where it is

TIA

Title: Re: Reversing Sensors
Post by: Marks DTM Calib on 30 October 2007, 14:44:05

Its behind the trim on the rear C post above the seat belt upper mount.

Title: Re: Reversing Sensors
Post by: Elite Pete on 30 October 2007, 16:21:00

Thanks Mark :y

Title: Re: Reversing Sensors
Post by: Kevin Wood on 14 November 2007, 14:20:12

Don't know if you resolved this, Pete, but I've been looking at the wiring diagrams and came across the park pilot. Do you have a towbar? There's some wiring that appears to be to disable the parkpilot if a trailer is hitched up. It connects either side of the fog light switch on the towing connector so if the fog light switch in the towing electrics is duff, this could explain it (assuming a factory tow bar).

There appear to be 2 pins on the parkpilot (Grey wires) which are shorted to enable the parkpilot if the towbar is not fitted.

Just thought this might help.

Kevin

Title: Re: Reversing Sensors
Post by: Kevin Wood on 14 November 2007, 14:21:12

Ahh, just noticed it's the 3.2 so I guess it's irrelevant now. Still, someone might be glad of the info.

Kevin

Title: Re: Reversing Sensors
Post by: Elite Pete on 14 November 2007, 23:18:15

Cheers Kevin

I ordered a new ECU and sent it on the the new owner. Hopefully this will resolve the problem :y