Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: alexandjen on 11 June 2008, 17:49:57

Title: Adjusting dual climate temp controls together
Post by: alexandjen on 11 June 2008, 17:49:57

Is it possible to adjust the temperature of both sides from the drivers control? TIA  :y

Title: Re: Adjusting dual climate temp controls together
Post by: Dazzler on 11 June 2008, 17:52:14

My climate panel does......when i change the drivers one the passengers one follows, but they can also change theres which does not effect mine :-/

Title: Re: Adjusting dual climate temp controls together
Post by: Mr Skrunts on 11 June 2008, 17:53:15

I normally start my climate in AUTO with the temps both set on low.

Adjusting the temp on the drivers side they both move at the same time, but if I alter the passenger side they then each need adjusting on thier own.

But I have no idea if this is normal operation as I am still getting used to it my self.

Title: Re: Adjusting dual climate temp controls together
Post by: alexandjen on 11 June 2008, 17:54:04

Well mine operate independantly all the time which is a pain in the ar@e  ::)

Title: Re: Adjusting dual climate temp controls together
Post by: Mr Skrunts on 11 June 2008, 17:55:50

Reset them.

Title: Re: Adjusting dual climate temp controls together
Post by: alexandjen on 11 June 2008, 17:57:49

That just sprang to mind as you posted...I'll go and reset now.....auto and off for 10 secs isn't it?   Climate on or off for reset?

Title: Re: Adjusting dual climate temp controls together
Post by: Mr Skrunts on 11 June 2008, 17:59:34

Press and hold OFF and AUTO at the same time for 10 seconds

If I am wrong one of the other members will corrent me.

Title: Re: Adjusting dual climate temp controls together
Post by: alexandjen on 11 June 2008, 18:10:22

Ok I've just reset the climate..........I think  :-/

Is something supposed to happen when it has reset as nothing seems any different  :(  does anything flash to confirm reset?

Title: Re: Adjusting dual climate temp controls together
Post by: TheBoy on 11 June 2008, 18:10:56

2001, presumably a facelift, just press the passenger side knob - this will switch off display passenger side, and temps will follow drivers side setting.

Prefacelifts, if the get out of sync (ie, passenger adjusts their side), it will reset to follow drivers side after 40mins with ign off.

Title: Re: Adjusting dual climate temp controls together
Post by: alexandjen on 11 June 2008, 18:20:53

Yes facelift, thanks TB  :y

Title: Re: Adjusting dual climate temp controls together
Post by: garbage456 on 12 June 2008, 19:59:36

if both sides are showing a temperature

press the drivers side, this will turn off the display on the passenger side,
adjust to the temperature you want,
press the drivers side again, both will come on.

thats it !!

2001 facelift elite

Title: Re: Adjusting dual climate temp controls together
Post by: Mr Skrunts on 12 June 2008, 20:00:59

Quote

Yes facelift, thanks TB  :y

Sorry, hadnt picked up on that, my appologies.

Title: Re: Adjusting dual climate temp controls together
Post by: kcl on 12 June 2008, 20:48:02

Tell me what's wrong with my climate. Works ok, but pressing the drivers knob leaves temp reading on passanger side ( and I've got the steering wheel on left). If I change the wiring, I will get the display and function ok, but then I would change passengers temp while turning the drivers knob. Was this bad enough explanation of the status quo? Hope someone gets my point and knows what to do

Title: Re: Adjusting dual climate temp controls together
Post by: TheBoy on 12 June 2008, 21:00:10

Quote

Tell me what's wrong with my climate. Works ok, but pressing the drivers knob leaves temp reading on passanger side ( and I've got the steering wheel on left). If I change the wiring, I will get the display and function ok, but then I would change passengers temp while turning the drivers knob. Was this bad enough explanation of the status quo? Hope someone gets my point and knows what to do

Needs programming to state which side driver is - sounds like yours is programmed fot RHD