Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: 70spider on 12 July 2008, 12:30:45

Title: stereo wont sit flush
Post by: 70spider on 12 July 2008, 12:30:45

Hi as anyone got an idea why my stereo wont go all the way back? cant see anything stopping it. The cage is flush all tabs down but it sticks out about 2inchs and keep knocking it when i put it in park.

Title: Re: stereo wont sit flush
Post by: markey mark on 12 July 2008, 12:38:07

all it will be is plugs on back bit of a mare to get right but it will go with a bit of wiggilling  :y

Title: Re: stereo wont sit flush
Post by: 70spider on 12 July 2008, 12:40:08

Thanks will give it a try

Title: Re: stereo wont sit flush
Post by: TheBoy on 12 July 2008, 13:00:33

Is it factory fit radio, and does it still have its cage?

Title: Re: stereo wont sit flush
Post by: 70spider on 12 July 2008, 15:28:19

No its after market and yes i have the cage

Title: Re: stereo wont sit flush
Post by: Jimbob on 12 July 2008, 16:58:57

Can be tricky to get after market ones to sit well, esp if there are a few adaptors. You could try removing it all and jiggling where things sit.

space is very tight behind there!

Title: Re: stereo wont sit flush
Post by: osealy on 12 July 2008, 19:13:14

I put a sony into a previous omega. Even with the plugs tidy I had to help it in with my foot.
Wiring went on fire some years later, don't think it was related.