Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: JesterRT on 11 September 2008, 13:01:57
-
I've read that the Mirror needs to get the 'Reverse' signal to cancel the auto-dipping. Will it work without?
Anyway - if I had memory seats, how does it hook into the repositioning? I share the car with the missus and it was something that I really liked. Being able to set the seats & mirrors up so that they just went to 'normal' was great.
-
I've read that the Mirror needs to get the 'Reverse' signal to cancel the auto-dipping. Will it work without?
Anyway - if I had memory seats, how does it hook into the repositioning? I share the car with the missus and it was something that I really liked. Being able to set the seats & mirrors up so that they just went to 'normal' was great.
It will work without, but the is designed to undip it in reverse. Its only 1 wire to run, and easy to do ;)
The memory on mirror needs memory seat base fitted and fully wired, which means adding:
- the loom
- the seats
- the autodip mirror
- door mirrors
All in all, bit of a mare.
-
Hmmm... maybe just the mirror then. Seats will have to stay in the old 'un.
Now I've spent a couple of longer journeys in the CDX, there are a few of the 'Elite' things that I miss... still - at least the engine's in one peace in this one :)
-
seats are easy matey only two/three wires to connect the memory and electrics !! :y
-
seats are easy matey only two/three wires to connect the memory and electrics !! :y
Much more if you want to retain positions of mirrors as well, which I though OP did :-/
-
seats are easy matey only two/three wires to connect the memory and electrics !! :y
Much more if you want to retain positions of mirrors as well, which I though OP did :-/
oh yes an abosolute nitemare if you want the memory on mirrors :o