Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Giovannidelbianco on 01 October 2008, 12:16:43
-
Hello
I have a problem with GID and a new head unit NCDC 2015. I Change my CDR 2005 with NCDC 2015 and i make new connections. At the begin appear RADIO SAFE but after i use tech 2 it disapear. The NCDC 2015 haven't telematic unit so in tech2 i chose for display code 005 and for radio code 037, it is correct? The problem is that the display, after i close the radio, remains on and there isn't at the top of display the date but the radio station. How i can do?It is a problem of cabling wires or software?
-
Hello
I have a problem with GID and a new head unit NCDC 2015. I Change my CDR 2005 with NCDC 2015 and i make new connections. At the begin appear RADIO SAFE but after i use tech 2 it disapear. The NCDC 2015 haven't telematic unit so in tech2 i chose for display code 005 and for radio code 037, it is correct? The problem is that the display, after i close the radio, remains on and there isn't at the top of display the date but the radio station. How i can do?It is a problem of cabling wires or software?
State model of car, tyre size, whether manual or auto. We can then advise code index. GIDs/GIDs on 3.2 autos for example should be 074 (sad I can remember such things, must get out more!)
Best to pair stating Telematics 'NOT PRESENT'
From memory, top line of GID (ie, above the horizontal line) on phone capable head unit is for phone use only, ie, Network name, message waiting, diverts, signal etc.
You have access to Tech2 to do all this?
Where abouts are you?