Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Tonnee on 12 October 2008, 13:20:35

Title: Engine warning light on
Post by: Tonnee on 12 October 2008, 13:20:35

Hi

I have just vaxed all the water from the footwell in my omega after clearing all the crud from the scuttle.

However since doing this the engine management light has come on, not sure if its related or not, how can I check what the faukt will be, I have been looking on Ebay and noticed the Tech2 devices and software for about £20 and wandered if it is worth buying one?

Cheers

Tony

Title: Re: Engine warning light on
Post by: JonArgraig on 12 October 2008, 13:21:42

Have a look in the how to section for the "Paper clip" test, this will help you get the codes out

Title: Re: Engine warning light on
Post by: Andy B on 12 October 2008, 13:32:08

Quote

.....
 I have been looking on Ebay and noticed the Tech2 devices and software for about £20 and wandered if it is worth buying one?

Cheers

Tony

Yes, I think so. You could always take a trip along the A58 to Bury .... and see what mine says. ;)