Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: ngrainqey on 29 November 2008, 14:05:09

Title: ecu sets...
Post by: ngrainqey on 29 November 2008, 14:05:09

hiya,
wasnt sure wether to post in here or in general...
if you have two recievers for the ignition barrel then how can you tell which set its from (ones from 2.0 and ones from 3.0)
hope you can help or it means trying to figure out which goes with which or sell both sets when i'd rather hang onto the 3.0 one :(
thanks

Title: Re: ecu sets...
Post by: markey mark on 29 November 2008, 15:20:03

only way is to try them alex !  :-/

Title: Re: ecu sets...
Post by: MutantCav on 30 November 2008, 19:19:21

I have a 2 litre here Alex if you want to try out the ECU etc on it??

Title: Re: ecu sets...
Post by: Marks DTM Calib on 30 November 2008, 19:37:43

Quote

I have a 2 litre here Alex if you want to try out the ECU etc on it??

That wont work....the immobiliser ECU/receiver is coded to the engine ECU.....hence why you have to change them as a set

Title: Re: ecu sets...
Post by: ngrainqey on 30 November 2008, 20:32:52

Quote

Quote

I have a 2 litre here Alex if you want to try out the ECU etc on it??

That wont work....the immobiliser ECU/receiver is coded to the engine ECU.....hence why you have to change them as a set

i think he means try the set out mark :y
well i could do chris, have to get the tank going next weekend and pop across ;)