Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: vauxfan2k on 01 February 2009, 20:18:33

Title: suitable replacement for car400 h/u
Post by: vauxfan2k on 01 February 2009, 20:18:33

Looking to fit a factory vaux unit into the estate, currently has car400 unit which only does tapes and no changer. will a cd300 unit work the TID? my Sc804 wont as its setup for the MID.

Being the GLS it doesnt have the changer loom in place.

cheers  :y

Title: Re: suitable replacement for car400 h/u
Post by: Dave DND on 01 February 2009, 20:20:56

My best guess would be CDR500

 :-/

Title: Re: suitable replacement for car400 h/u
Post by: MutantCav on 01 February 2009, 20:23:44

Thats what I was going to say but not sure about TID...

Title: Re: suitable replacement for car400 h/u
Post by: TheBoy on 02 February 2009, 08:39:41

ccr600 should be reasonable upgrade - simple enough job to run the loom (check that there is the large audio multiplug in drivers kickpanel first).  CCR800 with Bose is another option easy to fit.

CDR500 is a single CD is enough.

All these can work with 8 and 10 digit displays.