Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: paulsmv6 on 23 February 2009, 18:09:27

Title: omega 3.0v6 converted to manual
Post by: paulsmv6 on 23 February 2009, 18:09:27

hi there i hav just bin reading up on the manual converstion of a omega 3.0v6 and i read up on the wire for the ignition timing retard if this hasnt bin done wot problems wud it cause wud it cause. :y thanks

Title: Re: omega 3.0v6 converted to manual
Post by: Andy B on 23 February 2009, 20:22:40

Quote

hi there i havE just bin BEEN reading up on the manual converstion of a omega 3.0v6 and i read up on the wire for the ignition timing retard if this hasnt bin BEEN done wot WHAT problems wOuLd it cause wOuLd it cause. :y thanks

No idea.  :-X  :-/ :-/

http://www.omegaowners.com/forum/YaBB.pl?virboard=Newbies;num=1209458172

General Posting
 ........

Use English, no text speak which is notoriously difficult to read.
 ........

Title: Re: omega 3.0v6 converted to manual
Post by: paulsmv6 on 24 February 2009, 18:32:46

i will cut the wires anyway must b a reason for it thanks anyway :y

Title: Re: omega 3.0v6 converted to manual
Post by: Marks DTM Calib on 24 February 2009, 18:40:55

There is a post in the maintenance guides telling you what to do....there is a minimum of one single wire that needs changing on the engine ECU to default it to manual mode.