Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: gazsomega on 19 March 2009, 07:25:12

Title: 2.5 chip codes
Post by: gazsomega on 19 March 2009, 07:25:12

my mate is going to fit my chip and socket into my 2.5 td he has asked me to see if anyone has a status report for the chip he said it will be a big peice a paper telling you what the chip does and he said it will be in codes any help

Title: Re: 2.5 chip codes
Post by: Marks DTM Calib on 19 March 2009, 15:31:46

Quote

my mate is going to fit my chip and socket into my 2.5 td he has asked me to see if anyone has a status report for the chip he said it will be a big peice a paper telling you what the chip does and he said it will be in codes any help

He knows not what he talks of.

Its a standard 28 Pin wide DIL Eprom....so good quality 28 pin wide turned pin sockets are required.

Nothing more neeed.

And he needs to be GOOD at through hole de-soldering (the re-soldering bit is easy) as its a multilayer board.

Title: Re: 2.5 chip codes
Post by: gazsomega on 20 March 2009, 07:49:38

ill pass it on see hwat he says his not seen my ecu yet so god help him but he repairs tvs for a living so may make more sence than it does to me

Title: Re: 2.5 chip codes
Post by: zirk on 20 March 2009, 16:52:37

Quote

my mate is going to fit my chip and socket into my 2.5 td he has asked me to see if anyone has a status report for the chip he said it will be a big peice a paper telling you what the chip does and he said it will be in codes any help

I think maybe he's asking for the eprom hex dump / print out ??? :-/ :-/ :-?

Title: Re: 2.5 chip codes
Post by: gazsomega on 20 March 2009, 18:41:59

yes he is just rang him any ideas chaps