Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Welung666 on 18 July 2009, 02:06:58

Title: CDX loom question....
Post by: Welung666 on 18 July 2009, 02:06:58

Is the loom on my 99 CDX the same as the Elite loom? I ask because I'd like to (legally) fit Xenons. The headlight washers won't be a problem as I want to fit a facelift rear bumper and front end so will buy a suitable front bumper, but do I have the wiring for the self-levelling headights or will it be a pain in the @rse?

Title: Re: CDX loom question....
Post by: markey mark on 18 July 2009, 07:37:40

no lee no wires for self leveling for headlights but wiring should be there for self levelling shockers :y

Title: Re: CDX loom question....
Post by: TheBoy on 18 July 2009, 10:40:28

fitting the wiring for self levelling headlights shouldn't be too difficult technically (fiddly running all the wiring), as it is a simple system - small ecu near osf wheel, 2 sensors, and wiring to motors.

And if you're really keen, a single wire back to diags line