Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: neilr on 21 July 2009, 17:53:34

Title: REAR BLIND FITTING
Post by: neilr on 21 July 2009, 17:53:34

hi does any one know how hard it os to fit above to a cd model 2001 i had one in the cdx and found it useful for keeping the car cooler

Title: Re: REAR BLIND FITTING
Post by: Andy B on 21 July 2009, 18:40:01

Quote

hi does any one know how hard it os to fit above to a cd model 2001 i had one in the cdx and found it useful for keeping the car cooler

Remove parcel without blind. Refit parcel shelf with blind, plug it in & fit switch ..... so they say! ;)
I've removed my shelf/blind ages ago, & the only problem was a bit of stray rear screen glue was holding he shelf in too. It gave in in the end!  ;D ;D ;D :y

Title: Re: REAR BLIND FITTING
Post by: Beverley on 21 July 2009, 18:50:46

Quote

Quote

hi does any one know how hard it os to fit above to a cd model 2001 i had one in the cdx and found it useful for keeping the car cooler

Remove parcel without blind. Refit parcel shelf with blind, plug it in & fit switch ..... so they say! ;)
I've removed my shelf/blind ages ago, & the only problem was a bit of stray rear screen glue was holding he shelf in too. It gave in in the end!  ;D ;D ;D :y

yours should have the wiring already to be honest and is just a case of out with the old and in with the new and connnect the wiring..

Dont forget to get the switch in the dash to work it though

Bev

Title: Re: REAR BLIND FITTING
Post by: AndyVXR300 on 21 July 2009, 19:10:31

Quote

Quote

Quote

hi does any one know how hard it os to fit above to a cd model 2001 i had one in the cdx and found it useful for keeping the car cooler

Remove parcel without blind. Refit parcel shelf with blind, plug it in & fit switch ..... so they say! ;)
I've removed my shelf/blind ages ago, & the only problem was a bit of stray rear screen glue was holding he shelf in too. It gave in in the end!  ;D ;D ;D :y

yours should have the wiring already to be honest and is just a case of out with the old and in with the new and connnect the wiring..

Dont forget to get the switch in the dash to work it though

Bev

Spot on Bev

You must of been watching me do mine :D

Title: Re: REAR BLIND FITTING
Post by: alexandjen on 21 July 2009, 19:26:11

Quote

hi does any one know how hard it os to fit above to a cd model 2001 i had one in the cdx and found it useful for keeping the car cooler

I've fitted one to my CDX -  only couple of little problems were that the wiring plug connector was different as the blind came from a pre-facelift and the slot for the seat belt cover needed adapting slightly so that the trim piece clipped in properly :y

Wiring should be up under shelf in boot on left hand side :y

As said, get the dash switch (about £10 from Vx) which is plug and play :y

Other than that it was pretty straight forward, the guide below helped me....................

http://www.omegaowners.com/forum/YaBB.pl?num=1152745304

Title: Re: REAR BLIND FITTING
Post by: neilr on 22 July 2009, 14:58:03

thanks guys anyone breaking a facelift with a blind ?