Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Ryan Hegarty on 23 July 2009, 23:46:01

Title: Phone prewiring connection
Post by: Ryan Hegarty on 23 July 2009, 23:46:01

Wondering if anyone can help me, I'm looking for the lead that connects the phone prewiring connector behind the glove box to the nokia car kit - do you know which type of lead I need and where I can purchase one; my car is fitted with the NCDC2013 head unit with CID and has the Bose sound system.
Also what do I need to link up the cars phone aerial to the hands free kit.

Title: Re: Phone prewiring connection
Post by: VXL V6 on 24 July 2009, 09:17:12

An Autoleads 06-109B (the one with the transformers as you have Bose) for the link to the prewiring.

There is a specific aerial 'patch lead' but I won't be able to tell you the number until i'm next home!

Title: Re: Phone prewiring connection
Post by: Ryan Hegarty on 24 July 2009, 14:06:46

Thanks so far.  :y

Title: Re: Phone prewiring connection
Post by: Ryan Hegarty on 24 July 2009, 16:46:00

Has anyone else got any other car phone suggestions for me?

Title: Re: Phone prewiring connection
Post by: TheBoy on 25 July 2009, 09:24:10

Sorry, I thought the answer above was all encompassing - that lead is the one to connect a Nokia type kit to your stereo. You may need to run the mic if your can doesn't have one, and run the bluetooth button if its a bluetooth kit.

Any car audio place can get you the autoleads adapter.  Unless its a fix car kit, it won't use external aerial - bluetooth kits will use the phone's built in aerial

Title: Re: Phone prewiring connection
Post by: Ryan Hegarty on 25 July 2009, 17:50:40

Hi again I've ordered an Autoleads 06-109B connection lead and a Nokia 616 car kit is there anything that I will require? :y

Title: Re: Phone prewiring connection
Post by: Ryan Hegarty on 26 July 2009, 10:44:53

Hi again was wondering is the Autoleads PC5-104 the correct lead for extending the pre-wired phone antenna at the drivers kick panel to the hands free kit?

Title: Re: Phone prewiring connection
Post by: VXL V6 on 26 July 2009, 12:29:52

Yes, should do the job.

Not sure what the connector is on the 616 (It does support an external antenna) but most Nokia's support the FME connection.

Title: Re: Phone prewiring connection
Post by: Ryan Hegarty on 26 July 2009, 15:42:12

Thanks for your help guys. :y
Do you know if the connector on this lead is the right one for connection to the cars lead?

Title: Re: Phone prewiring connection
Post by: VXL V6 on 26 July 2009, 18:19:32

Yes it is.  :y

Title: Re: Phone prewiring connection
Post by: Ryan Hegarty on 26 July 2009, 21:42:27

Many Thanks - it's great to get good sound advice and not be wasting money on purchases when you're lacking in knowledge.
 :y :y