Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: pedroMV6 on 20 January 2010, 09:48:11

Title: Bose
Post by: pedroMV6 on 20 January 2010, 09:48:11
The Elite is to be stripped out, so might as well fit some of the goodies to the MV6, and was wondering how difficult the Bose and phone systems would be to transfer.
Any ideas?

Elite - 2.5 2000 facelift
MV6 - 2.6 2001 facelift
Title: Re: Bose
Post by: TheBoy on 20 January 2010, 19:48:12
do-able.  loom from headunit to kick panel is the killer, as mv6 won't have it, and probably to hard to rmove from elite.  loom from kick panel back is easy enough to retrofit to mv6.
Title: Re: Bose
Post by: pedroMV6 on 20 January 2010, 20:07:27
Quote
do-able.  loom from headunit to kick panel is the killer, as mv6 won't have it, and probably to hard to rmove from elite.  loom from kick panel back is easy enough to retrofit to mv6.

Ta for that - doesn't seem over-difficult!

Is that a stand-alone loom strictly for the phone and Bose? Any idea where the phone aeriel is?
Title: Re: Bose
Post by: TheBoy on 20 January 2010, 20:08:24
Quote
Quote
do-able.  loom from headunit to kick panel is the killer, as mv6 won't have it, and probably to hard to rmove from elite.  loom from kick panel back is easy enough to retrofit to mv6.

Ta for that - doesn't seem over-difficult!

Is that a stand-alone loom strictly for the phone and Bose? Any idea where the phone aeriel is?
aerial on roof.

what hu?
Title: Re: Bose
Post by: pedroMV6 on 20 January 2010, 20:20:26
CCRT2008

Same aeriel as radio I presume? That's the only one on there!
Title: Re: Bose
Post by: TheBoy on 20 January 2010, 20:26:22
saloom or estate.


need to swap screen, and get mic.  lots of wiring changes needed as well
Title: Re: Bose
Post by: VXL V6 on 20 January 2010, 20:31:43
Speakers
As TB says, hardest bit is the HU - kick panel loom as MV6 (and the CD estate i've been looking at!) don't terminate in the correct plug.  :(
Title: Re: Bose
Post by: pedroMV6 on 20 January 2010, 20:57:40
Quote
saloom or estate.


need to swap screen, and get mic.  lots of wiring changes needed as well

Both estates!
Screen - plugs different? I prefer the Elite screen TBH.
Title: Re: Bose
Post by: TheBoy on 20 January 2010, 21:12:36
Quote
Quote
saloom or estate.


need to swap screen, and get mic.  lots of wiring changes needed as well

Both estates!
Screen - plugs different? I prefer the Elite screen TBH.
screen uses different protocol, slightly different wiring.
Title: Re: Bose
Post by: pedroMV6 on 20 January 2010, 21:36:29
Cheers guys - not the hardest of jobs, but likely to give me some grief!!! :o
I think I'll just upgrade my speakers and sling my 10" sub and amp in to be honest.

Please don't  tell me there's no outputs at the back of the HU in the MV6!!!
Title: Re: Bose
Post by: TheBoy on 20 January 2010, 21:41:59
Quote
Cheers guys - not the hardest of jobs, but likely to give me some grief!!! :o
I think I'll just upgrade my speakers and sling my 10" sub and amp in to be honest.

Please don't  tell me there's no outputs at the back of the HU in the MV6!!!
std hu on mv6 is cdr2005. No lineouts.  nor are there on any std omega hu
Title: Re: Bose
Post by: pedroMV6 on 20 January 2010, 21:45:09
Bugger!!! ::)
Title: Re: Bose
Post by: Dave DND on 20 January 2010, 22:47:50
Quote
Quote
Cheers guys - not the hardest of jobs, but likely to give me some grief!!! :o
I think I'll just upgrade my speakers and sling my 10" sub and amp in to be honest.

Please don't  tell me there's no outputs at the back of the HU in the MV6!!!
std hu on mv6 is cdr2005. No lineouts.  nor are there on any std omega hu

Don`t worry, I have a solution for that problem

http://www.dndservices.co.uk/pc9-451.html

 :y
Title: Re: Bose
Post by: pedroMV6 on 20 January 2010, 22:59:34
Quote
Quote
Quote
Cheers guys - not the hardest of jobs, but likely to give me some grief!!! :o
I think I'll just upgrade my speakers and sling my 10" sub and amp in to be honest.

Please don't  tell me there's no outputs at the back of the HU in the MV6!!!
std hu on mv6 is cdr2005. No lineouts.  nor are there on any std omega hu

Don`t worry, I have a solution for that problem

http://www.dndservices.co.uk/pc9-451.html

 :y

Nice one - page saved! :y