Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: propector on 08 February 2010, 14:53:45
-
Omega X reg 2litre GLS 4 door saloon.
I just fitted a new ignition lock cylinder, so had to unplug and remove the airbag, which I did after disconnecting the negative battery terminal and waiting a few minutes.
After reassembly the car goes ok, but airbag warning light is on all the time.
Any suggestions how to fix this?
TIA
Prospector :(
-
Bugger.
Didn't disturb any airbag wiring around the steering wheel, seat, or door?
Needs a decent code reader, and somebody who knwos how to use it, to find out exactly what has gone wrong. May just need resetting, but I'd do a live data on it as well to check that values are too close to thresholds.
-
Are you anywhere near me?
-
I'm in Sutton Coldfield. I'll just go and do a paperclip test and see if it shows anything :-/
-
I'm in Sutton Coldfield. I'll just go and do a paperclip test and see if it shows anything :-/
Paperclip does sod all for airbag.
Not sure if Auto Addict has any kind of code reader suitable, seeing as he is nearby...
-
Your right! It shows 1502 and 1503 = Immobilser Fault, which I forgot to re-connect before starting the engine after fitting the new key barrel. :-[
-
I can reset your airbag light, if you want me to.
I live on the border of SC.
-
Yes please. How can I contact you?
;)
-
Yes please. How can I contact you?
;)
Click on the PM link at the bottom of AA`s post
-
Yes please. How can I contact you?
;)
Send me a PM with your phone number, and I'll get back to you.
-
All sorted, nice to have met you Pete.
-
Thanks very much for all your help. As you say - all sorted! :)