Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Edd on 18 February 2010, 18:45:45

Title: pin out help
Post by: Edd on 18 February 2010, 18:45:45

Hi there
does anyone have the pin outs for a 36 pin radio loom and a 26 pin radio loom please as i would like to make an adaptor between the 2

Title: Re: pin out help
Post by: TheBoy on 18 February 2010, 19:05:08

It varies. A lot.

What are you trying to fit in, and what have you taken out?

Title: Re: pin out help
Post by: Edd on 18 February 2010, 19:24:52

i have a ccr2006 fitted and want to put a traffic master in. its only a few cables but need to make sure im connecting to the same on the back of my radio

Title: Re: pin out help
Post by: VXL V6 on 18 February 2010, 20:04:26

You can get a 26 Way ISO Trafficmaster loom, try looking for one from a Vectra B.

Title: Re: pin out help
Post by: Edd on 18 February 2010, 20:06:33

ive got the 26 way on the traffic master but the radio is 36 way

Title: Re: pin out help
Post by: VXL V6 on 18 February 2010, 20:27:14

Sorry my mistake! You can get a 36 Way loom! Try one of the breakers on here.

Title: Re: pin out help
Post by: Edd on 18 February 2010, 20:43:33

its ok ive found the pin outs

http://www.ccpip.org/800/service/Connctn.html#CCRt700

Cheers anyway

Title: Re: pin out help
Post by: Edd on 18 February 2010, 21:00:22

Ok now for my next question, it appears the tm uses the telephone inputs on the radio. on the 26 way they are A3, C3 and C8. Can anybody tell me the equivelent on the 36 way as they are not listed.

Thanks in advance

Edd

Title: Re: pin out help
Post by: TheBoy on 18 February 2010, 21:23:34

Quote

its ok ive found the pin outs

http://www.ccpip.org/800/service/Connctn.html#CCRt700

Cheers anyway

No, thats wrong.  Thats what I mean there are different pinouts depending on radio.

Basically, you need to wire it straight, routing the audio in and tel mute via the TM box.

Far easier to get a 36 way loom - lots about on this site ;)

Title: Re: pin out help
Post by: Edd on 18 February 2010, 21:28:07

Ok mate, thanks will ask for one now